![]() |
Backup Sump Pump Guide
|
![]() |
![]() |
![]() |
FREE - Basementsaver High
Water Detector & Alarm System
We're giving away a FREE Basementsaver High Water Detector & Alarm System with every Water Powered Sump Pump!
An HP-Series backup pump is the optimum choice for basements with VERY HIGH water supply pressure, in the range 75-150psi:
![]() |
![]() |
![]() |
The Basementsaver WP-Series and the Basementsaver HP-Series are each comprised of 3 extremely powerful, ultra-reliable, emergency backup sump pump models: |
Basementsaver WP-Series water powered backup sump pumps operate using
NORMAL Pressure municipal water supplies (in the range 40-100psi)
Basementsaver HP-Series water powered backup sump pumps operate using
VERY HIGH Pressure water supplies (in the range 75-150psi).
Basementsaver WPA & HPA water powered backup sump pumps operate at Normal and Very High Pressure respectively, but they differ from WP and HP pumps by featuring integrated 'Approved' AVB Backflow Prevention Devices.
There are 3 Basementsaver water powered emergency pump capacities to choose from: WP1 & HP1 (residential), WP2 & HP2 (large residential), and WP3 & HP3 (commercial).
Gallons of Sump Water Removed/Hour From Your Sump
Model | Inlet Size | Min Flow At Inlet | Max Pump Rate | Buy WP | Buy HP |
WP1/HP1 | 1/2 or 3/4 in | 420 gph / 7 gpm | 900 gph | $218.00 | $389.00 |
WP2/HP2 | 3/4 in | 600 gph / 10 gpm | 1,400 gph | $319.00 | $459.00 |
WP3/HP3 | 3/4 or 1 in | 900 gph / 15 gpm | 2,000 gph | $435.00 | $559.00 |
Advanced design & engineering removes more water per hour than other water powered backup sump pumps, even out-pumping battery powered emergency pumping systems in long-term operation. Each Basementsaver WP / HP backup pump achieves such extremely high efficiency that every gallon of city water flow can actually remove up to 2 gallons of water from your basement sump pit (based on a 10 ft lift to discharge)!
Basementsaver WP & HP Water Powered Backup Sump Pump FeaturesEach Basementsaver WP / HP emergency pumping system represents the most advanced water powered backup sump pump technology currently available: - Easy-Installation Instructions For WP-Series Backup Pumps - Easy-Installation Instructions For HP-Series Backup Pumps |
Here's What You Get: WP-Series Pump Installation Manual HP-Series Pump Installation Manual |
You'll Also Need (Buy Locally): |
Basementsaver WP-Series water powered backup pumps operate using NORMAL city water supplies with continuous water pressures in the range 40-100psi. Since most households have NORMAL city water pressure (40-100psi) a WP-Series Pump is probably YOUR best choice!
NOTE: WP-Series models will not pump at al at pressures below 30psi - If your water pressure is less than 40psi choose a battery backup sump pump!
NOTE: WP-Series pumps should NOT be used above 100psi or they will be damaged! - If YOUR water pressure continuously exceeds 100psi get an HP-Series pump.
Basementsaver HP-Series water powered backup pumps are designed for operation in some commercial / industrial water systems with VERY HIGH water pressure (75-150psi).
NOTE: HP-Series pumps will not work at all below 70 psi.
Step 1 - Measure Your Water Flow Rate
Define your household flow rate by measuring the time to fill a 5 gallon bucket from a hose spigot. Requirements are:
Step 2 - Measure Your Water Pipe At The Water Meter Outlet
Avoid restrictions and run your Basementsaver pump supply line directly from a pipe of the required minimum diameter (usually Copper pipe or PVC, CPVC, PEX... plastic piping - according to the specific local plumbing code in Your area). By convention, water pipes are always specified by internal diameter measurements. Required pipe (internal) diameters are:
Step 3 - Select Your Optimum Pump Model
Use the specification table above to select the optimum WP-Series (or HP-Series) water powered backup sump pump model for Your specific application, based on your required maximum pumping capacity and available water flow.
Basementsaver WP & HP Water Powered Sump Pump Catalog:WP1 Water Powered Backup Sump Pump (40-100psi / 900 gph) - ON SALE |
Basementsaver WP-Series & HP-Series water powered backup pumps are designed to prevent the possibility of backflow into your potable water supply under normal operating conditions. However, some local plumbing codes may also require a separate 'Approved' backflow prevention device. For these areas, Basementsaver WPA-Series & HPA-Series water powered backup sump pumps feature an integrated 'Approved' Atmospheric Vacuum Breaker (AVB) backflow prevention device.
To determine whether 'Approved' backflow prevention is required in your specific area contact your local plumbing inspector. IF YOU DO NOT NEED AN 'APPROVED' BACKFLOW PREVENTION DEVICE CHOOSE A WP OR HP-SERIES PUMP!
The Water Powered Backup Sump Pump Comparison Table allows you to quickly compare all Basementsaver water powered sump pump models.
Download a Printable Pump Comparison Table (PDF)
All Basementsaver BP, Battery Backup Sump Pumps, Basementsaver WP / WPA, Water Powered Sump Pumps, and Basementsaver HP / HPA High Pressure Water Powered Sump Pumps are excellent emergency backup sump pumps. Learn more about how to choose the best backup sump pump technology to protect Your specific basement.
![]() |
||
You Do Not Need A PayPal Account, You Can Use Your Credit Card To Checkout |
|
|
Basementsaver Backup Pumps come with a 30 day Satisfaction Guarantee and a separate Warranty. If You ever need help Basementsaver is here for You.
![]() |
![]() |
Secure Transactions: |
FREE Mainland US Shipping
Canada - USA - Mexico
We Ship Backup Pumps
Anywhere In North America!
Basementsaver
NEW 2015 MODELS
5 YEAR WARRANTY
ON ALL WATER POWERED
SUMP PUMPS
Made from tough Polypropylene Thermoplastic that will never foul or corrode, with stainless steel fittings. Basementsaver water powered pumps operate using the Venturi Effect, with no electric motor or other moving parts to wear out, and no battery to maintain or periodically replace. More About How A Basementsaver Water Powered Pump Works...
Install Your water powered sump pump water supply the easy way with an Easy-Fit push-on plumbing kit:
Rated to 230psi Water Pressure
Ideal For Plumbing In Your Water Supply To All Basementsaver Water Powered Pumps
Push-on fittings are designed for use with Your flexible or rigid copper tubing or PEX plastic tubing (not included) - 18 inch Flexible Stainless Steel Hose included.
NO Soldering - Includes push-on 'tee', adapter, elbow, ball valve, ferrules, pipe supports, screws, and complete instructions for easy connection to your existing 3/4 inch copper or plastic main water supply pipe.
Easy Pump Alignment - Includes 18 inch Flexible Stainless Steel Hose
Download Easy-Fit Instructions
BUY Your Easy-Fit Kit
NEXT>>
BUY Your Water Powered Sump Pump |
Web Marketing Strategy & Solution by 1stFlash Web Marketing Consultants, New York