|
| Home | Why Backup? | Choosing Your Optimum Pump | Water Powered Backup Pumps | Battery Powered Backup Pumps | BUY Online | Contact Us |
Backup Sump Pump GuideBasementsaver WP-Series
|
| Basementsaver WP1 Water Powered Pump Pump Up To 900 gal/hr WP1 Sump Pump Specifications |
| Basementsaver WP2 Water Powered Pump Pump Up To 1,400 gal/hr WP2 Sump Pump Specifications |
| Basementsaver WP3 Water Powered Pump Pump Up To 2,000 gal/hr WP3 Sump Pump Specifications |
|
Here's What You Get:
|
|
You'll Also Need (Buy Locally):
|
An HP-Series backup pump is the optimum choice for basements with higher than average water supply pressure, in the range 70-150psi:
| Basementsaver HP1 Water Powered Pump Pump Up To 900 gal/hr HP1 Sump Pump Specifications |
| Basementsaver HP2 Water Powered Pump Pump Up To 1,400 gal/hr HP2 Sump Pump Specifications |
| Basementsaver HP3 Water Powered Pump Pump Up To 2,000 gal/hr HP3 Sump Pump Specifications |
FREE High Water Alarm
Every Basementsaver backup sump pump offers You unbeatable value:
Each WP or HP Water Powered Emergency Backup Sump Pump comes with a FREE Basementsaver High Water Level Detector & Alarm!
Confused?Find The Best Backup Sump Pump For Your Basement: |
The Basementsaver WP-Series and the Basementsaver HP-Series are both comprised of 3 extremely powerful, ultra-reliable, emergency backup sump pump models, each powered by city water flow. Instead of using electrical power, these water powered sump pumps rely on the force of flowing city water to suck unwanted water out of your basement sump pit. There is no battery to maintain or periodically replace.
Each Basementsaver Water Powered Sump Pump is a self-contained independent system from your primary basement sump pump. Each lightweight pump unit is easily installed above your sump pit on, a basement ceiling rafter, remaining safe from corrosion and inadvertent damage. When properly installed, your Basementsaver water powered sump pump is virtually unbreakable in normal use as an emergency backup pump.
Basementsaver WP-Series water powered backup sump pumps operate using
Normal Pressure municipal water supplies (with pressure in the range 40-100psi).
There are 3 Basementsaver water powered emergency pump capacities to choose from: WP1 & HP1 (residential), WP2 & HP2 (large residential), and WP3 & HP3 (commercial).
Gallons of Sump Water Removed/Hour From Your Sump
| Model | Inlet Size | Min Flow At Inlet | Max Pump Rate | Buy WP | Buy HP |
| WP1/HP1 | 1/2 or 3/4 in | 420 gph / 7 gpm | 900 gph | $299.00 | $369.00 |
| WP2/HP2 | 3/4 in | 600 gph / 10 gpm | 1,400 gph | $359.00 | $429.00 |
| WP3/HP3 | 3/4 or 1 in | 900 gph / 15 gpm | 2,000 gph | $469.00 | $539.00 |
Advanced design & engineering removes more water per hour than other water powered backup sump pumps, even out-pumping battery powered emergency pumping systems in long-term operation. Each Basementsaver WP / HP backup pump achieves such extremely high efficiency that every gallon of city water flow can actually remove up to 2 gallons of water from your basement sump pit (based on a 10 ft lift to discharge)!
Basementsaver WP & HP Water Powered Backup Sump Pump FeaturesEach Basementsaver WP / HP emergency pumping system represents the most advanced water powered backup sump pump technology currently available: - Easy-Installation Instructions For WP-Series Backup Pumps - Easy-Installation Instructions For HP-Series Backup Pumps |
Basementsaver WP-Series water powered backup pumps operate using municipal water supplies with continuous water pressures in the range 40-100psi.
Basementsaver HP-Series water powered backup pumps operate using municipal water supplies with continuous water pressures in the range 75-150psi.
Your household water pressure will typically be in the range 40 - 100psi. To determine your water pressure you should be able to purchase a hose spigot water pressure gauge (typically for about $10 at your local hardware store).
Inlet pressures less than the pumps recommended lowest limit decrease pumping efficiency so that pumping ceases completely at 30 psi for WP models, or at 70 psi for HP models.
Exceeding 100psi will damage Your WP-Series pump valve and void the warranty, so in this case you will either need to install a 'pressure regulating valve' upstream of the WP pump unit or purchase an HP-Series water powered backup pump (rated to 150psi) instead.
HP-Series water powered backup pump models are designed for operation with city water pressures in the range 75-150psi. If your water pressure continuously exceeds 100psi we recommend that you purchase an HP-Series pump.
Step 1 - Measure Your Water Flow Rate
Define your household flow rate by measuring the time to fill a 5 gallon bucket from a hose spigot. Requirements are:
Step 2 - Measure Your Water Pipe At The Water Meter Outlet
Avoid restrictions and run your Basementsaver pump inlet pipe directly from a water meter outlet pipe of the required minimum diameter (most often copper pipe is used, but you may also be able to use PVC, CPVC, PEX... plastic piping, according to the specific local plumbing code in Your area). By convention, water pipes are always specified by internal diameter measurements. Required pipe (internal) diameters are:
Step 3 - Select Your Optimum WP / HP Model
Use the specification table above to select the optimum WP / HP model water powered backup sump pump for Your specific application, based on your required maximum pumping capacity and available water flow.
Extended Backflow Prevention To Protect Your City Water Supply
Basementsaver WP-Series & HP-Series water powered backup pumps are inherently designed to minimize the possibility of backflow to your potable water supply under normal operating conditions. However, some local plumbing codes may also require a separate 'approved' backflow prevention device. To determine whether an additional 'approved' backflow prevention device is required in your specific area contact your local plumbing inspector.
Basementsaver WPA-Series & HPA-Series water powered sump pumps feature an integrated 'Approved' Atmospheric Vacuum Breaker (AVB) backflow prevention device.
WPA & HPA 'Approved' Backflow Prevention Water Powered Sump Pump Details
Alternatively, You may purchase a separate 'approved' backflow protection device locally and install it downstream of a WP-Series or HP-Series pump unit, but it is important that you check the water flow rate through the device to ensure that it does not cause an unacceptable restriction and follow all WPA/HPA AVB installation guidelines.
Gallons of Sump Water Removed/Hour From Your Sump
| Model | Inlet Size | Min Flow At Inlet | Max Pump Rate | Buy WPA | Buy HPA |
| WPA1/HPA1 | 1/2 or 3/4 in | 420 gph / 7 gpm | 900 gph | $369.00 | $439.00 |
| WPA2/HPA2 | 3/4 in | 600 gph / 10 gpm | 1,400 gph | $429.00 | $499.00 |
| WPA3/HPA3 | 3/4 or 1 in | 900 gph / 15 gpm | 2,000 gph | $539.00 | $609.00 |
|
Basementsaver WPA & HPA Water Powered Sump Pump / 'Approved' AVB:
WPA1 Water Powered Backup Sump Pump (40-100psi / 900 gph) - ON SALE Standard Basementsaver WP & HP Water Powered Sump Pump Catalog:
WP1 Water Powered Backup Sump Pump (40-100psi / 900 gph) - ON SALE |
The Water Powered Backup Sump Pump Comparison Table allows you to quickly compare all Basementsaver water powered sump pump models and is available as a downloadable and printable PDF file.
The Basementsaver BP, Battery Backup Sump Pump, the Basementsaver WP / WPA, Water Powered Sump Pump, and the Basementsaver HP / HPA High Pressure Water Powered Sump Pump are all excellent emergency backup sump pumps. Find out how to choose the best backup sump pump technology to protect Your specific basement and it's valuable contents.
Call 1-866-374-3977
Basementsaver Backup Pumps come with a 30 day no quibble guarantee and a separate warrantee. If You ever need help Basementsaver is here for You.
If you rely on a sump pump to keep your basement dry, you need to know that the aftermath of sump pump failure is a very painful experience, with $10,000's of damage in many cases.
Avoid Unnecessary Pain & Cost!
Now Basementsaver can help You avoid this pain, reducing the risk of flooding in Your basement with the Basementsaver WP-Series of Water Powered Sump Pumps.
Our Most Popular Model:
|
Basementsaver WP2 Water Powered Pump ***** BEST $ VALUE |
The Basementsaver WP2 Water Powered Sump Pump is specifically designed for large-residential applications. No other battery or water-powered emergency sump pump can beat it's overall performance for cost-effective, maintenance-free, ultra-reliable high flow rate pumping efficiency.
The WP2 is an exceptional deal, not only because of it's incredible world-beating performance, but also because we can now offer high volume pricing on this extremely popular backup pump model.
Canadians $SAVE$ Even More
Right Now Canadians can take advantage of an excellent exchange rate to buy Your water powered backup sump pump using $US. Exchange rates are automatically processed when you use your credit card to purchase. Buy Here
Canada - USA - Mexico
We Ship Backup Pumps
Anywhere In North America!
Install Your water powered sump pump water supply the easy way with an Easy-Fit push-on plumbing kit:
Rated to 230psi Water Pressure
Ideal For Plumbing In Your Water Supply To All Basementsaver Water Powered Pumps
Push-on fittings are designed for use with Your flexible or rigid copper tubing or PEX plastic tubing (not included) - 18 inch Flexible Stainless Steel Hose included.
NO Soldering - Includes push-on 'tee', adapter, elbow, ball valve, ferrules, pipe supports, screws, and complete instructions for easy connection to your existing 3/4 inch copper or plastic main water supply pipe.
Easy Pump Alignment - Includes 18 inch Flexible Stainless Steel Hose
Download Easy-Fit Instructions
BUY Your Easy-Fit Kit
| NEXT>>
BUY Your Water Powered Sump Pump |
| Home | Why Backup? | Choose Your Pump | Water Powered Backup Pumps | Battery Powered Backup Pumps | BUY Online | Contact Us | SiteMap |
1stFlash.com Web Marketing Consultants, New York - (716) 775-0206