Basement Sump Pump Center

Basementsaver BP0 & BP1 Battery Backup Sump Pumps are cost-effective premium quality battery powered backup pumping systems designed for high performance and the simplest possible installation.

Each pump comes complete with all necessary instructions, fittings and connections, just buy a deep cycle marine battery loacally and you are ready to go! The system very easily installs with the submerged backup pump mounting inside your basement sump pit, above your main AC sump pump, and sharing the same discharge line. Peak battery power is maintained by a high performance AC/DC charger.

Typical BP0/BP1 Battery Backup Sump Pump System Installation:
Make sure the check valve on your main sump pump discharge pipe is in good working order. If in any doubt replace it immediately.
Step 1: Attach mounting bracket to BP0 or BP1 pump unit
Step 2: Connect flexible discharge hose to pump using clamp
Step 3: Place fully charged battery into case (don't connect yet)
Step 4: Lower pump/bracket assembly into your sump against the sidewall
Step 5: Place the battery case/battery on bracket
Step 6: Unplug your main sump pump and connect the T fitting and hose
Connect the battery and test the unit by raising the float.
Plug both your backup pump charger and your main sump pump back into your GFCI outlet. You now have complete protection for Your basement and it's valuable contents!
BP0 and BP1 Battery Backup Pump Specifications & Purchase

Basementsaver BP2 Battery Backup Sump Pump is a premium quality battery powered backup sump pump designed for normal to high residential pumping rates, even when space in your existing sump pit is limited.

This 'Out-Of-Sump' backup pump system comes complete with all necessary fittings and connections and easily installs on your basement floor beside your sump pit. You will need to buy a deep cycle marine battery locally, but everything else that you need is provided. Peak battery power is maintained by a high performance AC/DC charging system.

Typical BP2 Battery Backup Sump Pump System Installation:
This pump is also very easy to install. With only the suction pipe and float residing in the sump, even very narrow sumps can accommodate it. Make sure the check valve on your main sump pump discharge pipe is in good working order. If in any doubt replace it immediately. A one-way valve at the base of the BP2 suction pipe prevents water from returning to your sump pit through the backup pump and keeps it primed.
Step 1: Place the BP2 backup pump unit on the floor next to your sump pit
Step 2: Unplug your main sump pump
Step 3: Install the suction pipe
Step 4: Install the flexible discharge pipe
Step 5: Install the float switch
Plug both your backup pump charger and your main sump pump back into your GFCI outlet. You now have complete protection for Your basement and it's valuable contents!
BP2 Battery Backup Pump Specifications & Purchase

Basementsaver BP3 Battery Backup Sump Pump is our highest power max pump rate professional quality emergency backup sump pump system for very high pumping rates.

For ease of installation, this backup system also shares the same discharge line as your existing basement pump. It uses one or two 12V batteries (which you should buy locally) to power an inverter, that delivers 110V AC current to the backup pump unit. The batteries are monitored and maintained by a state-of-the-art AC/DC charging unit.

Typical BP3 Battery Backup Sump Pump System Installation:
This extremely powerful backup sump pump is also an 'Out-Of-Sump' system that resides on the basement floor beside your sump pit. It operates when the sump water rises above normal level and raises it's float.
Step 1: Connect Discharge Pipe to backup pump & Place In Pit
Step 2: Attach Float to discharge pipe
Step 3: Seat Backup Pump in sump pit
Step 4: Install the backup pump flexible discharge pipe
Step 5: Install the power inverter
Step 6: Connect cables
Plug both your backup pump charger and your main sump pump back into your GFCI outlet.You now have complete protection for Your basement and it's valuable contents!
BP3 Battery Backup Pump Specifications & Purchase